Blower Door Testing

The first step in determining the right Energsmart solution.
Learn MoreRequest a Quote

Energy auditors use blower door tests to help determine a building’s airtightness.

These are some reasons for establishing the proper building tightness:

  • Reducing energy consumption due to air leakage
  • Avoiding moisture condensation problems
  • Avoiding uncomfortable drafts caused by cold air leaking in from the outdoors
  • Determining how much mechanical ventilation might be needed to provide acceptable indoor air quality.

How They Work

A blower door is a powerful fan that mounts into the frame of an exterior door. The fan pulls air out of the house, lowering the air pressure inside. The higher outside air pressure then flows in through all unsealed cracks and openings. The auditors may use a smoke pencil to detect air leaks. These tests determine the air infiltration rate of a building.

Blower doors consist of a frame and flexible panel that fit in a doorway, a variable-speed fan, a pressure gauge to measure the pressure differences inside and outside the home, and an airflow manometer and hoses for measuring airflow.

Diagnostic Tools

There are two types of blower doors: calibrated and uncalibrated. It is important that auditors use a calibrated door. This type of blower door has several gauges that measure the amount of air pulled out of the house by the fan. Uncalibrated blower doors can only locate leaks in homes. They provide no method for determining the overall tightness of a building. The calibrated blower door’s data allow the auditor to quantify the amount of air leakage and the effectiveness of any air-sealing job.

 

Request a quote
Ask a question
Leave a comment

Call Us:
1-888-WNY-FOAM (969-3626)
(716) 775-8035
(716) 775-8057 fax

Mailing Address:
Energsmart Foam Insulation
483 Sawyer Avenue
Tonawanda, NY 14150